Original: $224.21
-65%$224.21
$78.47The Story
Mods House Kust Mod
The Kust from Mods House is a singleĀ 18650Ā mod running the Evolv DNA60C chipset at up to 60W. Made in France from 6061 aluminium and 316L stainless steel with an asymmetrical profile sized for atomisers up to 22mm. The whole mod is held together by two screws, so the outer sleeve lifts off in seconds for swapping or cleaning.
The Evolv DNA60C brings a colour screen, full Escribe configurability, temperature control, and firmware updates through the USB-C 2A port. It's one of the most accurate chipsets on the market for wattage and TC regulation, so what you set is what you get. Available in two versions with the battery tube either visible or covered by the sleeve.
Built as a pairing for the Mods House Noctua RTA at 22mm, but it'll take any atomiser up to that diameter on the spring-loaded 510 connection. Battery not included. If you're after high-end mods with genuine European craftsmanship and a chipset that punches well above the wattage, this is it.
Key Features
- Evolv DNA60C chipset with colour screen, Escribe support, and TC
- Up to 60W output from a single 18650 (sold separately)
- 6061 aluminium and 316L stainless steel construction
- Modular sleeve removable and swappable with two screws
- Asymmetrical profile sized for atomisers up to 22mm
- USB-C 2A for charging, Escribe configuration, and firmware updates
- Spring-loaded 510 connection
- Two design versions with or without battery tube visible
- Made in France by Mods House

Modular Sleeve
The Kust's outer sleeve is secured by just two screws. Remove them and the sleeve slides off, giving you full access to the internals for cleaning or maintenance. Mods House sell the sleeves separately in different materials and finishes, so you can change the look of the mod without buying a new one. The battery tube underneath is either visible or hidden depending on which version you pick, and both options keep the same structural integrity once the sleeve is back on.
Kust DNA60c Specifications
|
Spec |
Detail |
|
Product |
Mods House Kust DNA60c Mod |
|
Chipset |
Evolv DNA60C |
|
Output |
Up to 60W |
|
Battery |
Single 18650 (sold separately) |
|
Material |
6061 aluminium, 316L stainless steel |
|
510 Connection |
Spring-loaded |
|
Atomiser Size |
Up to 22mm |
|
USB |
USB-C 2A (charging, Escribe, firmware) |
|
Screen |
Colour (DNA60C) |
|
Modes |
VW, TC, Escribe configurable |
|
Construction |
Modular, two-screw sleeve |
|
Origin |
Made in France |
What's in the Box
-
1 x Mods House Kust DNA60c Mod
18650 battery is NOT included and sold separately. Pick up cells from theĀ 18650 battery collection.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Mods House Kust Mod
The Kust from Mods House is a singleĀ 18650Ā mod running the Evolv DNA60C chipset at up to 60W. Made in France from 6061 aluminium and 316L stainless steel with an asymmetrical profile sized for atomisers up to 22mm. The whole mod is held together by two screws, so the outer sleeve lifts off in seconds for swapping or cleaning.
The Evolv DNA60C brings a colour screen, full Escribe configurability, temperature control, and firmware updates through the USB-C 2A port. It's one of the most accurate chipsets on the market for wattage and TC regulation, so what you set is what you get. Available in two versions with the battery tube either visible or covered by the sleeve.
Built as a pairing for the Mods House Noctua RTA at 22mm, but it'll take any atomiser up to that diameter on the spring-loaded 510 connection. Battery not included. If you're after high-end mods with genuine European craftsmanship and a chipset that punches well above the wattage, this is it.
Key Features
- Evolv DNA60C chipset with colour screen, Escribe support, and TC
- Up to 60W output from a single 18650 (sold separately)
- 6061 aluminium and 316L stainless steel construction
- Modular sleeve removable and swappable with two screws
- Asymmetrical profile sized for atomisers up to 22mm
- USB-C 2A for charging, Escribe configuration, and firmware updates
- Spring-loaded 510 connection
- Two design versions with or without battery tube visible
- Made in France by Mods House

Modular Sleeve
The Kust's outer sleeve is secured by just two screws. Remove them and the sleeve slides off, giving you full access to the internals for cleaning or maintenance. Mods House sell the sleeves separately in different materials and finishes, so you can change the look of the mod without buying a new one. The battery tube underneath is either visible or hidden depending on which version you pick, and both options keep the same structural integrity once the sleeve is back on.
Kust DNA60c Specifications
|
Spec |
Detail |
|
Product |
Mods House Kust DNA60c Mod |
|
Chipset |
Evolv DNA60C |
|
Output |
Up to 60W |
|
Battery |
Single 18650 (sold separately) |
|
Material |
6061 aluminium, 316L stainless steel |
|
510 Connection |
Spring-loaded |
|
Atomiser Size |
Up to 22mm |
|
USB |
USB-C 2A (charging, Escribe, firmware) |
|
Screen |
Colour (DNA60C) |
|
Modes |
VW, TC, Escribe configurable |
|
Construction |
Modular, two-screw sleeve |
|
Origin |
Made in France |
What's in the Box
-
1 x Mods House Kust DNA60c Mod
18650 battery is NOT included and sold separately. Pick up cells from theĀ 18650 battery collection.























