Vaporesso XTank T MTL Tank

Vaporesso XTank T

The Vaporesso XTank T is a slim MTL and RDL tank with a 22.4mm diameter. It sits flush on compact mods like the GTX One Pro without any overhang. It uses GTX coils from 0.4 to 1.2 ohm and comes with a 0.6 ohm and 1.2 ohm mesh coil in the box. Standard 510 connection so it'll screw onto most mods you've already got.

Top airflow is the big selling point with the XTank T. Air comes in from the top of the tank rather than the bottom, so there are no holes underneath for juice to leak through. Vaporesso's SSS leak-resistant design on top of that makes the XTank T one of the tidier tanks to carry around. Adjustable airflow ring lets you close it right down for a tight cigarette-style MTL pull or open it up for a looser RDL draw. Works with nic salts and 50/50 e-liquids across all five compatible coils.

Vaporesso MTL Tank Key Features

• 22.4mm Slim Diameter flush fit on compact mods, no overhang
• Top Airflow no bottom holes, fewer leaks
• GTX Coils 0.4 to 1.2 ohm 0.6 and 1.2 ohm included
• COREX Mesh even heating for longer coil life
• Adjustable Airflow Ring tight MTL to loose RDL
• Top Fill pop the cap, fill, close
• SSS Leak Resistant sealed fill port and top airflow combined
• 510 Connection fits most mods

XTank T for MTL Vaping

The XTank T is one of the better MTL tanks in the Vaporesso range if you're after a tight draw with nic salts. Pop the 1.2 ohm coil in and close the airflow ring right down. The draw sits somewhere between a cigarette and a tight pod kit. For a slightly looser MTL pull, the 0.8 ohm coil with the airflow half-closed gives you more warmth and vapour. You still get that restricted feel without it opening up too much.

Pair either coil with a 10 or 20mg nic salt for the best results on MTL. Top airflow helps with MTL vaping more than you'd think. Tanks with bottom airflow tend to gurgle and spit at low wattages with higher resistance coils. The XTank T's top airflow avoids that problem completely.

GTX Coil Options

Two GTX coils in the box, with more available from the full Vaporesso GTX coil range:

Close the airflow right down with the 1.2 ohm coil and it feels close to a cigarette draw. Open it halfway with the 0.6 ohm and you get a warmer, slightly airier RDL pull with more vapour.

Specifications

Vaporesso XTank T vs Other Vaporesso Tanks

Vaporesso runs two current tank lines and it's worth knowing the difference before you commit, because they're aimed at completely different vape styles:

• XTank T (this tank) - the slim 22.4mm MTL and RDL tank built around the GTX coil platform (0.4 to 1.2 ohm). 2ml top-fill capacity, 510 thread, top airflow, SSS leak-resistant. Best for tight MTL draws on nic salts or restricted RDL pulls with 50/50 e-liquid, paired with a compact mod like the GTX One Pro. This is the Vaporesso MTL tank pick.
• iTank T - the larger sub-ohm DTL tank bundled with the Armour Ultra Kit. Runs the GTi coil platform (sub-ohm only, not GTX), 5ml bubble glass capacity, designed for direct-to-lung cloud production with high-VG shortfill e-liquids at 40 to 80W. Different coil family, different airflow style, different vape entirely - if you want clouds rather than a tight MTL draw, this is the one.

Short version: pick the XTank T for MTL or RDL on a compact mod, pick the iTank T for sub-ohm DTL cloud chasing on a higher-wattage box mod. They're not interchangeable - the coils don't cross over and the airflow profiles are different.

Compatible Mods for the Vaporesso XTank T

The XTank T uses a standard 510 thread connection and sits 22.4mm wide, so it'll fit flush on any 510 mod with a 22mm or larger top plate. A few Vaporesso mods that pair particularly well:

The Vaporesso GTX One Pro is the primary pairing for the XTank T. The kit was designed around this tank format - the 22.4mm tank sits perfectly flush on the GTX One Pro's top plate without any overhang, and the 5 to 40W output covers the full XTank T coil range (8-32W). If you want a compact, single-cell mod that suits the tank end-to-end, the GTX One Pro is the natural match. The kit also ships with a 0.4 ohm and a 0.8 ohm GTX coil, so coils carry across between the bundled GTX One Pro tank and your spare XTank T.

For a higher-wattage option, the Vaporesso Armour Ultra Mod takes the XTank T comfortably. It's a dual-18650 box mod with a 510 plate sized to handle 22 to 30mm tanks, so the 22.4mm XTank T sits flush. You'll have plenty of headroom on power, although the XTank T's coil range tops out at 32W so you won't be running it anywhere near the Armour Ultra's ceiling.

If you want a single-18650 box mod that's still pocket-friendly, the Vaporesso Armour S is another solid 510 mod pairing. The Armour S fires up to 100W, takes any 22mm-plus 510 tank, and the user-replaceable 18650 battery means you can carry spares for back-to-back sessions. Drop the XTank T on top and you have a slim MTL tank on a box mod platform.

When you need a replacement glass tube down the line, the XTank T replacement glass tube is available as a separate consumable.

What's in the Box?

• 1x Vaporesso XTank T
• 1x GTX 0.6 ohm Mesh Coil (20-26W)
• 1x GTX 1.2 ohm Mesh Coil (8-12W)
• 1x Straight Drip Tip
• 2x O-Rings
• 1x Refilling Silicone Plug
• 1x User Manual

Other Vaporesso Pod Kits to Consider

If this kit is not quite the right fit, these adjacent Vaporesso kits sit in the same or neighbouring sub-ranges and are worth a look.

• Vaporesso iTank T Sub-Ohm Tank